Installer
un IRCu de type ancien
L'IRCu (Universal
IRC Daemon) est developpé par Undernet. Les IRCu de type ancien offrent peu de
possibilités comparés aux nouveaux IRCu, mais ils permettent d'utiliser des
services tels que CService et/ou Uworld, au contraire des nouveaux IRCu.
Pour l'installer,
suivez les indications suivantes (étant loggué en SSH) :
- tar zxvf
ircu2.10.10.tgz
- cd ircu2.10
- ./configure
- make config
Lors du make
config, une série de questions va vous êtres posées, voici un exemple pour y
répondre :
*
* No defaults found
*
* Welcome to the Undernet IRC Daemon Configuration script.
* You can restart this configuration at any time by typing 'make config'.
* If you need help with your decision on any question, type a '?'
*
*-----------------------------------------------------------------------------
* Debugging (do not define this on production servers)
*
DEBUGMODE : Do you want to enable debugging output [N/y/?] (NEW)
Tapez : Entrée
CONFIG_NDEBUG : Do you want to enable asserts and memory allocation checking
[N/y/?] (NEW)
Tapez : Entrée
NODNS : Are you testing on a host without DNS [N/y/?] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Compile stuff
*
CC : Which compiler do you want to use [gcc] (NEW)
Tapez : Entrée
* For the following four questions, specify 'none' when you want it to be empty.
CFLAGS : What flags should I pass to gcc [none] [-g -O3 -pipe] (NEW)
Tapez : Entrée
EXTRA_INCLUDEDIRS : Do you need extra include directories [none] [none] (NEW)
Tapez : Entrée
LDFLAGS : Which linker flags do you need [none] [none] (NEW)
Tapez : Entrée
IRCDLIBS : Which extra libraries do you need [none] [-lcrypt -lresolv] (NEW)
Tapez : Entrée
BINDIR : In which directory should I install the ircd binary [/usr/local/bin]
(NEW)
/home/login/ircd (par exemple)
SYMLINK : What should the name of the installed symbolic link to the exectuable
be [ircd] (NEW)
Tapez : Entrée
IRCDMODE : Which permissions do you want the binary to have [711] (NEW)
Tapez : Entrée
IRCDOWN : Which owner do you want the binary to have [user] (NEW)
Taper le login de votre shell
IRCDGRP : Which group do you want the binary to have [user] (NEW)
Taper le login de votre shell
MANDIR : Where should I install the man page [/usr/local/man] (NEW)
/home/login/man (par exemple)
FORCEINLINE : Use inlining for a few crucial functions [Y/n/?] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Host specific defines
*
DOMAINNAME : What is the domain name of your network [] (NEW)
tchat-fr.net (par exemple)
RANDOM_SEED : Please give a random seed of eight characters [12345678] (NEW)
Tapez : Entrée
RELIABLE_CLOCK : Does your host have a reliable clock [N/y/?] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* General defines
*
CHROOTDIR : Change root (/) after start of daemon [N/y/?] (NEW)
Tapez : Entrée
CONFIG_SETUGID : Do you want the daemon set its own uid/gid [N/y/?] (NEW)
Tapez : Entrée
CMDLINE_CONFIG : Allow to specify configuration file on command line [N/y/?]
(NEW)
Tapez : Entrée
VIRTUAL_HOST : Do you need virtual hosting [N/y/?] (NEW)
Tapez : Y
HUB : Will you connect to more then one server at a time [N/y/?] (NEW)
Tapez : Y
*-----------------------------------------------------------------------------
* Paths and files
*
DPATH : Directory where all ircd stuff resides [/usr/local/lib/ircd] (NEW)
/home/login/ircd (par exemple)
The following filenames are either full paths or files within DPATH
CPATH : Server configuration file [ircd.conf] (NEW)
Tapez : Entrée
MPATH : Server MOTD file [ircd.motd] (NEW)
Tapez : Entrée
RPATH : Server remote MOTD file (3 lines max) [remote.motd] (NEW)
Tapez : Entrée
PPATH : File for server pid [ircd.pid] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Logging (filenames are either full paths or files within DPATH)
*
CONFIG_LOG_WHOX : Do you want to log the use of /WHO x% (recommended) [Y/n/?]
(NEW)
Tapez : Entrée
WPATH : Give the path and(or) filename of this log file [whox.log] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Bad Channel G-Lines allow operators to add channel masks to a list which
prohibits local clients from being able joining channels which match the mask.
Remote BadChan Glines allow Uworld to add or remove channels from the servers
internal list of badchans
*
BADCHAN : Do you want to enable Bad Channel G-lines [Y/n/?] (NEW)
Tapez : Entrée
WARNING DO _NOT_ USE LOCAL BADCHANNEL GLINES ON UNDERNET
Use of LOCAL BAD Channel G-Lines can be cause for REMOVAL
LOCAL_BADCHAN : Allow LOCAL BAD Channel G-lines [N/y/?] (NEW)
Tapez : Entrée
CONFIG_LOG_GLINES : Do you want to log G-lines to a separate file [N/y/?] (NEW)
Tapez : Entrée
CONFIG_LOG_USERS : Do you want to log connecting users to a separate file
[N/y/?] (NEW)
Tapez : Entrée
CONFIG_LOG_OPERS : Do you want to log Opers to a separate file [N/y/?] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Configuration
*
CRYPT_OPER_PASSWORD : Use crypted passwords for operators [Y/n/?] (NEW)
N ou Y suivant si vous souhaiter avoir des pass cryptés ou non (déconseillé
aux débutants)
BUFFERPOOL : Max size of the total of of all sendqs (bytes) [9000000] (NEW)
Tapez : Entrée
CLIENT_FLOOD : Max receive queue for clients (bytes) [1024] (NEW)
Tapez : Entrée
MAXCONNECTIONS : Maximum number of network connections (23 - (FD_SETSIZE-4))
[252] (NEW)
Tapez : Entrée
SERVER_PORT : Default port for connections to other servers [4400] (NEW)
Port de connexion des services
NICKNAMEHISTORYLENGT: Nickname history length [800] (NEW)
Tapez : Entrée
ALLOW_SNO_CONNEXIT : Allow Opers to see (dis)connects of local clients [N/y/?]
(NEW)
Tapez : Y
R_LINES : Do you want to use R: lines in your configuration file [N/y/?] (NEW)
Tapez : Entrée
USEONE : Do you want support for the old I:*:ONE:*:: construct (read help text!)
[N/y/?] (NEW)
Tapez : Entrée
NODEFAULTMOTD : Send a short message instead of the MOTD to connecting clients
[Y/n/?] (NEW)
Tapez : N
KILL_IPMISMATCH : Kill connecting clients when forward and reverse DNS mismatch
[N/y/?] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Oper commands
*
OPER_WALLOPS : Allow opers to wallop [N/y/?] (NEW)
Tapez : Entrée
SHOW_INVISIBLE_USERS: Allow (local) Opers to see all local invisible users
[Y/n/?] (NEW)
Tapez : Entrée
SHOW_ALL_INVISIBLE_U: Allow Opers to see all invisible users [Y/n/?] (NEW)
Tapez : Entrée
OPERS_SEE_IN_SECRET_: Allow global Opers (O:) to see inside secret channels
[Y/n/?] (NEW)
Tapez : Entrée
LOCOP_SEE_IN_SECRET_: Allow local Opers (o:) to see inside secret channels
[N/y/?] (NEW)
Tapez : Entrée
UNLIMIT_OPER_QUERY : Do not truncate obnoxiously long /who output for opers
[N/y/?] (NEW)
Tapez : Entrée
OPER_KILL : Allow Opers to use the KILL command [Y/n/?] (NEW)
Tapez : Entrée
OPER_REHASH : Allow Opers to use the REHASH command [Y/n/?] (NEW)
Tapez : Entrée
OPER_RESTART : Allow Opers to use the RESTART command [Y/n/?] (NEW)
Tapez : Entrée
OPER_DIE : Allow Opers to use the DIE command [Y/n/?] (NEW)
Tapez : Entrée
OPER_LGLINE : Allow Opers to add local G-lines [Y/n/?] (NEW)
Tapez : Entrée
OPER_REMOTE : Allow Opers to connect from a remote site [Y/n/?] (NEW)
Tapez : Entrée
LOCOP_REHASH : Allow local opers to use the REHASH command [Y/n/?] (NEW)
Tapez : Entrée
LOCOP_RESTART : Allow local opers to use the RESTART command [N/y/?] (NEW)
Tapez : Entrée
LOCOP_DIE : Allow local opers to use the DIE command [N/y/?] (NEW)
Tapez : Entrée
LOCOP_LGLINE : Allow local opers to add local G-lines [Y/n/?] (NEW)
Tapez : Entrée
OPER_NO_CHAN_LIMIT : Allow local/global opers to be on any number of channels
[Y/n/?] (NEW)
Tapez : Entrée
OPER_MODE_LCHAN : Allow local/global opers to set modes on local channels
[Y/n/?] (NEW)
Tapez : Entrée
OPER_WALK_THROUGH_LM: Allow local/global opers to walk through local channels
modes [N/y/?] (NEW)
Tapez : Entrée
NO_OPER_DEOP_LCHAN : Prevent local/global opers from being kicked or deoped on
local channels [N/y/?] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Server characteristics
*
CONFIG_LIST : Do you want to have a default LIST parameter [Y/n/?] (NEW)
Tapez : N
COMMENT_IS_FILE : K: line comments treated as a file by default [Y/n/?] (NEW)
Tapez : Entrée
IDLE_FROM_MSG : Only nullify idle-time on PRIVMSG [Y/n/?] (NEW)
Tapez : Entrée
*-----------------------------------------------------------------------------
* Mandatory defines (you should leave these untouched)
*
MAXIMUM_LINKS : Max auto connects per class (1!) [1] (NEW)
Tapez : Entrée
LOCAL_KILL_ONLY : Only allow KILLs of local clients [N/y/?] (NEW)
Tapez : Entrée
KILLCHASETIMELIMIT : KILL nick chase time limit (30) [30] (NEW)
Tapez : Entrée
MAXCHANNELSPERUSER : Max number of channels per user (recommended: 5) [10] (NEW)
Tapez : Entrée
MAXSILES : Max number of silence masks (15!) [15] (NEW)
Tapez : Entrée
AVBANLEN : Expected average banmask length (40!) [40] (NEW)
Tapez : Entrée
* These are default values, used for class 0:
TIMESEC : Max server idle time (60) [60] (NEW)
Tapez : Entrée
PINGFREQUENCY : Class 0 ping frequency (120) [120] (NEW)
Tapez : Enter
CONNECTFREQUENCY : Class 0 connect frequency (600) [600] (NEW)
Tapez : Entrée
HANGONGOODLINK : Min time before a link is good (300) [300] (NEW)
Tapez : Entrée
HANGONRETRYDELAY : Wait before reconnecting to good link (10!) [10] (NEW)
Tapez : Entrée
CONNECTTIMEOUT : connect(2) timeout (90!) [90] (NEW)
Tapez : Entrée
DEFAULTMAXSENDQLENGT: Max send queue (40000) [40000] (NEW)
Tapez : Entrée
*
* CONFIG_NEW : Use .config of THIS source tree as your upgrade default [Y/n/?]
Tapez : Entrée
Taper ensuite :
- make
- make install
Puis aller sur le
FTP, uploader le fichier exemple.conf, éditer le, & renommer le en ircd.conf.
Voici un exemple de configuration :
##
Configuration de l'ircd.conf ##
M:Irc.Tchat-fr.Net:213.161.196.13:Serveur
IRC Francophone:4400:1
A:Tchat-fr.Net:Serveur IRC Francophone:Staff Staff@tchat-fr.net
P::213.161.196.13:C:6667
Y:90:90:60:1:1700000
Y:50:90:0:10:1700000
Y:1:90:0:400:160000
Y:30:30:0:5:1700000
Y:10:90:0:100:160000
I:*@*:2:*@*::1
C:213.161.196.13:pass:Services.Tchat-fr.Net:4400:30
N:213.161.196.13:pass:Services.Tchat-fr.Net:30
H:*.*::Services.Tchat-fr.Net
U:Services.Tchat-fr.Net::*
O:*@*:password:hellhound:A:10
Voilà. Il ne
vous reste plus qu'à aller dans le répertoire où vous avez installé le serveur
et à taper ./ircd ou bien ./ircd -w ip si ./ircd n'ouvre aucun process). Bonne
chance:)
Article écrit par DarkmoOn
